P-Code Retrieval
One of the most common ways to generate a P-Code Template is to configure the phone using the webUI and exporting the phones configuration, which can be found under Maintance > Upgrade and provisioning. If you are unsure of a P-Code Value, change only one option at a time and re-check the configuration file.
P-Code Reference
P-Code | P-Code Value | Additional Information |
|---|---|---|
| P2 | Admin Password | |
| P3 | Display Name | |
| P8 | IP Address Type | 0=DHCP,1=Static |
| P9 | Static IP Address | Octet 0 |
| P10 | Static IP Address | Octet 1 |
| P11 | Static IP Address | Octet 2 |
| P12 | Static IP Address | Octet 3 |
| P13 | Subnet Mask | Octet 0 |
| P14 | Subnet Mask | Octet 1 |
| P15 | Subnet Mask | Octet 2 |
| P16 | Subnet Mask | Octet 3 |
| P17 | Gateway | Octet 0 |
| P18 | Gateway | Octet 1 |
| P19 | Gateway | Octet 2 |
| P20 | Gateway | Octet 3 |
| P21 | DNS Server 1 | Octet 0 |
| P22 | DNS Server 1 | Octet 1 |
| P23 | DNS Server 1 | Octet 2 |
| P24 | DNS Server 1 | Octet 3 |
| P25 | DNS Server 2 | Octet 0 |
| P26 | DNS Server 2 | Octet 1 |
| P27 | DNS Server 2 | Octet 2 |
| P28 | DNS Server 2 | Octet 3 |
| P29 | Early Dial | |
| P30 | NTP Time Server | FQDN or IP Address |
| P31 | SIP Registration | 0=Disabled,1=Enabled |
| P32 | Register Expiration | in minutes |
| P33 | Voicemail Dial String | |
| P34 | Authentication Password | |
| P35 | SIP User ID | |
| P36 | Authentication ID | |
| P37 | Voice Frames per TX | |
| P38 | Layer 3 QoS | |
| P39 | Local RTP Port | |
| P40 | Local SIP Port | |
| P47 | SIP Server | FQDN or IP Address |
| P49 | G723 Frame Rate | |
| P50 | Silence Suppression | 0=No,1=Yes |
| P51 | 802.1Q/VLAN Tag | |
| P52 | STUN NAT Traversal | 0=No,1=Yes |
| P57 | Codec Choice 1 | 0=g.711u, 8=g.711u, 18=g.729 |
| P58 | Codec Choice 2 | |
| P59 | Codec Choice 3 | |
| P60 | Codec Choice 4 | |
| P71 | Offhook Auto Dial | 0=No,1=Yes |
| P72 | Use # as Dial Key | 0=No,1=Yes |
| P104 | Default Ringtone | |
| P191 | Enable Call Features | 0=No,1=Yes |
| P192 | HTTP Firmware Update Server | |
| P193 | Firmware Check Interval | In Minutes |
| P194 | Auto Update | 0=No,1=Yes |
| P197 | Proxy Require | 0=No,1=Yes |
| P212 | Firmware Upgrade | 0=TFTP, 1=HTTP |
| P232 | Firmware File Prefix | |
| P233 | Firmware File Suffix | |
| P234 | Config File Prefix | |
| P238 | Check for New Firmware | 0=Always, 1=Only when Suffix/Prefix Changes, 2=Never |
Overrides
The following are all of the known overrides as of July 2015. Please consult with Grandstream support for the latest version of this file.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article